Join our Newsletter — 33% off our NHI Course
Home› Guides› GIAC GRID Certification Guide: Exam format, objectives, costs…
Guide Security Certifications

GIAC GRID Certification Guide: Exam format, objectives, costs and preparation

PDF for newsletter subscribers · free to read online

← All guides
By NHI Mgmt Group, edited by Lalit Choda Updated 14 November 2026 11 min read
On this page

Most industrial security credentials test whether you can design and protect a control system, but far fewer test whether you can find and respond to an attacker already inside one. The GIAC Response and Industrial Defense (GRID) certification is built for that second job: monitoring industrial networks, hunting for threats, and running incident response and forensics where safety and uptime come first. This guide sets out what GIAC publishes about GRID, the exam format and seven objectives, costs and renewal, a preparation plan built around those objectives, and how GRID sits beside GICSP on an OT career path. It is for ICS incident responders, OT security analysts, SOC staff who now cover plant networks, and managers deciding whether to fund it. Facts are as published on giac.org and sans.org, checked 14 November 2026; GIAC states that it can change prices at any time without notice, so confirm on the linked pages before you register.

This is an independent guide from NHI Mgmt Group, based on GIAC's public documentation as of November 2026. It is not sponsored or reviewed by GIAC. Certification details change, so confirm them against GIAC's current documentation.

Key takeaways

  • GRID is a response and defence credential. GIAC describes it as validating Active Defense for industrial control system networks, including network security monitoring, digital forensics and incident response.
  • The exam is 75 questions in 2 hours. GIAC lists one proctored exam with a minimum passing score of 74%, taken remotely through ProctorU or at a Pearson VUE centre.
  • Seven objectives, all ICS specific. Active defense, detection, incident response, monitoring, threat hunting, threat intelligence, and visibility and asset awareness.
  • The aligned course is SANS ICS515. ICS Visibility, Detection, and Response runs six days with 22 labs and includes a GIAC attempt and two practice tests when bought together.
  • Renewal follows GIAC's four-year cycle. Holders collect 36 CPE credits over four years and pay GIAC's renewal fee, listed at $499.

Who the certification is for

GIAC lists the GRID audience as ICS incident response team leads and members, ICS and OT security staff, IT security professionals, SOC team leads and analysts, ICS red team members and penetration testers, and active defenders.

  • Strong fit: responders who will be called when a plant, substation or water works shows signs of compromise; SOC analysts extending monitoring into OT networks; threat intelligence analysts who support industrial customers or business units.
  • Strong fit for employers: GIAC states it is an ANAB-accredited ISO/IEC 17024 personnel certification body, and the GRID page shows a DoD 8140 badge. The page does not set out a specific work role mapping, so confirm with the hiring organisation if 8140 alignment matters.
  • Weaker fit: engineers whose job is mainly secure design, segmentation and lifecycle security, for whom the GICSP Certification Guide is the closer match; and staff with no grounding in OT terms, who should build that first.

For the role picture see the OT Security Engineer Career Guide.

Exam format and objectives

Format

ItemGRID (as published by GIAC, checked 14 Nov 2026)
Certification typePractitioner certification
Exams1 proctored exam
Questions75
Time limit2 hours
Minimum passing score74%
DeliveryRemote proctoring through ProctorU, or onsite at a Pearson VUE testing centre
Attempt window120 days from activation of the attempt in the GIAC account
PrerequisitesNone listed by GIAC
Practice testsSold separately with a standalone attempt; two are included with ICS515 bundles

The seven objectives and what they mean in practice

GIAC publishes each objective as a one-line statement of what the candidate must understand. The right-hand column is NHI Mgmt Group's reading of the practical skills behind each one, drawn from the ICS515 module outline.

GIAC objectiveGIAC summaryPractical skills to build
Active Defense in an ICS EnvironmentActive defense applied to ICS, and what well-known ICS attacks teach todayCase studies such as Stuxnet, Ukraine 2015 and TRISIS; the ICS Cyber Kill Chain stages
Detection in an ICS EnvironmentTools and techniques to analyse network security evidence in ICSPacket capture analysis, detecting Stage 1 intrusion and Stage 2 attack activity, validating PLC logic changes
Incident Response in an ICS EnvironmentDFIR and its unique challenges in ICSSafe evidence acquisition, HMI memory forensics, process triage, IR team preparation
Monitoring in an ICS EnvironmentNetwork monitoring specific to ICS protocols and environmentsIndustrial protocol traffic analysis, sensor placement, baselining normal process traffic
Threat Hunting and Analysis in an ICS EnvironmentThreat hunting and analysis in ICSHypothesis-led hunts, malware triage, YARA rules, logic analysis
Threat Intelligence in an ICS EnvironmentThreat intelligence concepts applied to ICSConsuming intelligence, structured analytic techniques, collection management
Visibility and Asset Awareness in an ICS EnvironmentAsset discovery and network visibility strategies in ICSAsset inventories, the Collection Management Framework, passive network mapping

The aligned course: SANS ICS515

SANS lists ICS515: ICS Visibility, Detection, and Response as the main preparation path for GRID. As published on 14 November 2026 it runs six days (36 hours, 36 CPEs) with 22 hands-on labs, and live classes include four months of OnDemand access.

DayModuleCase studies and labs named by SANS
1ICS Cyber Threat IntelligenceStuxnet; ICS active defense; ICS Cyber Kill Chain; structured analytic techniques
2Visibility and Asset IdentificationBhopal; asset inventories; Collection Management Framework; ICS traffic and protocol analysis
3ICS Threat DetectionGerman steelworks attack and SANDWORM; threat hunting; network security monitoring; validating logic changes
4Incident ResponseSANDWORM (Ukraine 2015) and ELECTRUM/CRASHOVERRIDE; ICS forensics; safe acquisition; HMI memory forensics
5Threat and Environment ManipulationXENOTIME/TRISIS; malware triage; YARA; logic analysis
6Capstone: "Under Attack!"Packet captures, PLC logic and memory images from compromised ICS ranges

SANS does not require prior ICS experience but recommends ICS410, ICS456 or equivalent fundamentals such as SEC401, and comfort with terms such as SCADA, DCS, PLC and RTU. The course includes OnDemand access to ICS310. The background on the malware families covered is in the ICS Malware History Guide.

Cost, renewal and continuing education

ItemPublished price or rule (USD unless stated, excluding tax)
Standalone certification attempt (GIAC standard price)$999
Retake$899
Attempt extension$479
Practice exam (standalone)$399
ICS515 with GIAC attempt and two practice testsCourse from $9,230 at most US and live online events (some events $9,365 or EUR 8,630); adding the GIAC attempt at registration includes two practice tests, which SANS values at $798
RenewalEvery four years: 36 CPE credits plus the $499 renewal fee
Missed proctored appointment$175 reseating fee

GIAC accepts CPEs across categories including graduate courses, other information security training, community participation, field work experience, and other ISO/IEC 17024 accredited certifications, with maximums per category. Incident response work and ICS training usually cover the 36 credits without extra spend.

Preparation plan

  1. Check your foundations (week 1): confirm you can explain Purdue levels, common industrial protocols, how a PLC scan cycle works, and the difference between SCADA and DCS. If not, start with an ICS fundamentals course before ICS515.
  2. Take the course or self-study against the objectives (weeks 2 to 6): use the seven-objective table above as your syllabus and log where each topic is covered in your materials.
  3. Build an index (weeks 4 to 7): GIAC exams allow approved printed reference material; check GIAC's current exam policies for what is permitted, then build a tabbed index of terms, case studies, protocols and tools against your books and notes.
  4. Practise on real traffic (throughout): work through packet captures of industrial protocols, write simple detection logic, and rehearse the order of safe evidence collection on an HMI or engineering workstation.
  5. Sit a practice test under exam conditions (week 7): 75 questions in 2 hours leaves about 1.6 minutes a question; mark weak objectives and revise them.
  6. Second practice test and book the exam (week 8): book within the 120-day attempt window, leaving room for a reschedule.

Pair the study with your own environment where possible: the OT Network Security Monitoring Guide, OT Asset Visibility Guide and OT Incident Response Guide cover the same disciplines from an operating point of view.

GRID or GICSP: choosing the right GIAC ICS credential

QuestionGRIDGICSP
Core focus (GIAC description)Active defense, monitoring, detection, incident response and forensics in ICSSecuring industrial control systems across their lifecycle, combining IT, engineering and security
Exam (as published)75 questions, 2 hours, 74% to pass82 questions, 3 hours, 71% to pass
Aligned SANS courseICS515 ICS Visibility, Detection, and ResponseICS410 ICS/SCADA Cyber Security Essentials
Typical holderICS responder, OT SOC analyst, threat hunterOT engineer, IT staff moving into OT, integrator
Natural orderSecond, once the fundamentals are in placeFirst, as the bridge credential
  • Choose GRID first if you already work in incident response or a SOC and have been given OT coverage, and you are comfortable with ICS terms.
  • Choose GICSP first if you are new to industrial environments or your role is mainly design and hardening.
  • Hold both if you lead an OT security function that owns both architecture and response.
  • Small teams: one person often covers design and response, so GICSP followed by GRID is a common path; larger organisations can specialise, sending SOC and IR staff straight to GRID.

Responders who want deeper general forensics or incident handling can add other GIAC credentials: see the GIAC GCIH Guide, GIAC GCFA Guide and GIAC Detection and Monitoring Guide.

Where it fits on the career path and how to show value

GRID is most useful in roles where the holder will be asked to make decisions under pressure in a plant: whether to isolate a network segment, what evidence to collect before an engineer restores a controller, and how to tell a process upset from an intrusion. Employers and candidates can measure the return in operational terms rather than by the certificate alone.

MeasureWhat to track after certification
VisibilityShare of OT network segments with passive monitoring and a current asset inventory
DetectionNumber of ICS-specific detections in production, and time to triage an OT alert
Response readinessOT incident response tabletop or exercise completed in the past 12 months, with engineers present
Forensic readinessDocumented safe acquisition steps for HMIs, engineering workstations and historians
Intelligence useHunts run per quarter based on published ICS threat intelligence

For building the function around the role see the OT Security Operations Centre Guide.

Common failure patterns

  • Skipping the fundamentals: candidates from IT incident response underestimate how much industrial protocol and process knowledge the questions assume.
  • Weak index: an index that lists terms but not case study details, protocol behaviour and tool outputs costs time on a 2-hour exam.
  • Studying only the slides: the labs are where detection and forensics skills are built; candidates who skip them struggle with applied questions.
  • Treating ICS IR like IT IR: the course and exam stress safety, process impact and coordination with engineers, not only containment speed.
  • Letting the attempt window lapse: 120 days passes quickly alongside shift work; book early and pay attention to the extension fee.
  • Missing renewal credits: holders who do not log CPEs during the four years face a rushed renewal.

Practitioner checklist

  • Confirm current exam details, prices and policies on giac.org on the day you register.
  • Check your ICS fundamentals against the SANS prerequisites before booking ICS515.
  • Decide between a standalone attempt and the ICS515 bundle with two practice tests.
  • Map your study to the seven GIAC objectives and track coverage.
  • Build and test a tabbed index within GIAC's current reference material rules.
  • Practise on industrial packet captures and safe acquisition steps.
  • Sit at least one timed practice test and revise weak objectives.
  • Book the exam well inside the 120-day attempt window.
  • Log CPEs from day one for the four-year renewal.

Standards and references

Related NHI Mgmt Group resources: GICSP Certification Guide · GIAC Cloud Certifications Compared Guide · OT Security Engineer Career Guide · OT Incident Response Guide

PDF for subscribers

Take this guide with you

Every section, table and checklist in one PDF, with links to the sources and related guides. Subscribe to our weekly NHI & AI Identity Journal and we’ll email you a download link.

Free weekly newsletter

Subscribe to the NHI & AI Identity Journal

The latest on NHI and Agentic AI security – articles, research, breaches, news and events every week.

Bonus 33% off our NHI Course when you subscribe.

NHIMG Editorial Note
Researched and written by the NHI Mgmt Group editorial team using AI tools, under the editorial direction of Lalit Choda. Facts are drawn from the sources listed on this page and checked by our automated quality process. Last updated 14 November 2026. Spotted an error? Use our contact page.
NHI Mgmt Group, the independent authority on Non-Human Identity, IAM and Agentic AI security. nhimg.org

PDF Downloads for Newsletter Subscribers

Get the guide

Enter your details and we’ll email you a download link.

The full guide is free to read online. The PDF is a thank you for subscribing.

Fill in all fields marked * and tick the PDF box to continue.