Join our Newsletter — 33% off our NHI Course
Home› Glossary› Governance, Ownership & Risk› Code Integrity Blocklist
Governance, Ownership & Risk

Code Integrity Blocklist

← Back to Glossary
By NHI Mgmt Group Updated November 16, 2026 Domain: Governance, Ownership & Risk

A code integrity blocklist is a list of disallowed drivers, binaries, or hashes that an operating system refuses to trust or load. It is used to stop known-bad or vulnerable code from running in privileged contexts, especially where driver signing alone is not enough to prevent abuse.

What the blocklist does

A code integrity blocklist is a defensive denylist for code that should never be trusted by the operating system. It is most often used to stop known-bad or vulnerable kernel drivers and other privileged binaries from loading, even when they are signed, because a valid signature alone does not guarantee safety.

This makes the blocklist a control for execution trust, not just file reputation. It helps close the gap between code signing and real-world abuse, especially in environments where attackers rely on maliciously signed or previously trusted code to gain kernel-level execution.

Why blocklists exist

Blocklists exist because some code stays dangerous after signing, revocation delays, or vendor compromise. In practice, defenders use them when a specific binary, driver, or hash has been shown to create unacceptable risk, and they want the platform to refuse it at load time rather than detect it after the fact.

They are also a recognition that trust is contextual. A file may be legitimate in one release, vulnerable in another, or acceptable for ordinary use but unsafe in privileged contexts. The blocklist turns that judgment into an enforcement decision.

For terminology and policy trade-offs, see Allowlist vs Denylist, which explains why default-deny approaches are often preferred when the goal is to prevent known-bad code from running.

Where code integrity blocklists fit in the security stack

Blocklists sit alongside application control, driver policy, and code integrity enforcement. They are strongest when they are part of a broader control set that includes signed code requirements, constrained loading paths, and hardening features that reduce the chance of malicious or vulnerable code reaching privileged execution.

On Windows, that usually means pairing the blocklist with code integrity policy and related application control decisions. The practical point is that blocklisting is not a general malware cure, it is a targeted control for execution paths where a single bad driver or binary can undermine the whole endpoint.

That is why App Control for Business (WDAC) is a relevant companion concept, because WDAC is where code integrity policy is commonly operationalised and enforced.

For a broader view of execution control, Application Allowlisting Guide shows how blocklists compare with allowlisting approaches and why organisations often combine both.

Why attackers care about blocked code

Attackers are drawn to vulnerable or malicious drivers because privileged code can disable security tools, hide activity, or create persistence below normal user-mode visibility. A blocklist raises the cost of that path by removing known-abused code from the trust chain.

The most important failure pattern is not just malware execution, but abuse of trusted or signed code that defenders assumed was safe. If a vulnerable driver can still load, it can become an entry point for tampering, kernel exploit chaining, or security product interference.

That is why detection and hardening resources matter together. Bring Your Own Vulnerable Driver and EDR Killers Guide explains the abuse pattern blocklists are designed to stop, while Windows Endpoint Hardening Guide places that control inside the wider endpoint protection stack.

How practitioners should think about exposure

The main question is not whether a blocklist exists, but whether the organisation is actually loading code that the blocklist knows to reject. Exposure depends on asset inventory, driver usage, privileged software pathways, and whether endpoints are receiving current policy rather than stale defaults.

That makes vendor guidance and platform-specific block rules the authoritative source for version and policy details. Practitioners should treat the blocklist as a living control, because its value comes from staying aligned to newly identified risky code rather than sitting in a static configuration.

Risk and Threat Considerations

Code integrity blocklists matter because the failure mode is high impact: one allowed driver or binary can be enough to undermine endpoint trust, disable protections, or create kernel-level persistence. The risk is highest where organisations assume code signing alone is sufficient, or where blocklists are not kept current across the fleet.

Failure mechanism: A vulnerable or maliciously repurposed driver loads before or alongside security tooling, giving the attacker privileged execution, visibility reduction, or the ability to tamper with defenses.

Impact: The result can be security-tool disablement, stealthier persistence, local privilege escalation support, and wider compromise of the affected endpoint.

Standards & Framework Alignment

This section maps relevant standards and security frameworks to the operational risks and controls described in this guidance.

NIST SP 800-53 Rev 5 and CIS Controls v8 set the technical controls, while ISO/IEC 27001:2022 defines the regulatory obligations.

FrameworkControl / ReferenceRelevance
NIST SP 800-53 Rev 5SI-7 — Software, Firmware, and Information IntegrityCode integrity blocklists enforce integrity by refusing known-bad code at load time.
CM-7 — Least FunctionalityBlocklists support allowing only necessary code and reducing executable surface area.
AC-6 — Least PrivilegePreventing privileged code abuse depends on limiting what trusted code can do.
Recommendation — Apply SI-7 to block known-bad drivers and binaries before they can execute in privileged contexts. Use CM-7 to restrict loadable code to the minimum software required for the system's role. Enforce AC-6 so only necessary code paths and privileged actions are available to endpoints.
CIS Controls v8CIS-10 — Malware DefensesBlocklists are a malware defense that prevents known malicious or risky code from loading.
CIS-4 — Secure Configuration of Enterprise Assets and SoftwareBlocklists are deployed and maintained through hardened endpoint configuration.
CIS-2 — Inventory and Control of Software AssetsBlocklist effectiveness depends on knowing which binaries and drivers exist on the estate.
Recommendation — Use CIS-10 to prevent execution of known malicious or vulnerable code on managed endpoints. Use CIS-4 to baseline and maintain code integrity policy across endpoints. Use CIS-2 to inventory software and drivers so blocklist coverage can be validated.
ISO/IEC 27001:2022A.8.8 — Management of technical vulnerabilitiesBlocklists are used to suppress vulnerable code that should not be trusted or loaded.
A.8.9 — Configuration managementBlocklist enforcement is a configuration decision applied to endpoint trust policy.
Recommendation — Use A.8.8 to identify and control vulnerable code that should be blocked from loading. Use A.8.9 to manage and verify code integrity policy settings consistently.

Practitioner Guidance

Why practitioners should care: Treat the blocklist as an enforcement control, not a reporting control. If you are managing Windows endpoints, the practical job is to make sure the policy is deployed, updated, and actually blocking the code families you consider unacceptable.

What to watch for: Pay attention to systems that rely on custom drivers, security tooling, or legacy signed binaries, because those environments are most likely to surface compatibility trade-offs. When a blocklist causes breakage, the answer is usually policy review and controlled exception handling, not turning the control off broadly.

Practitioner takeaway: The blocklist is most effective when it is paired with code integrity enforcement, current driver intelligence, and post-deployment validation that confirms the platform is refusing the right code for the right reasons.

Free weekly newsletter

Subscribe to the NHI & AI Identity Journal

The latest on NHI and Agentic AI security – articles, research, breaches, news and events every week.

Bonus 33% off our NHI Course when you subscribe.

NHIMG Editorial Note
Reviewed and updated by the NHIMG editorial team on November 16, 2026.
NHI Mgmt Group — the #1 independent authority on Non-Human Identity, IAM, and Agentic AI security. nhimg.org