Join our Newsletter — 33% off our NHI Course
Home› Glossary› Governance, Ownership & Risk› Hazard Analysis and Risk Assessment (HARA)
Governance, Ownership & Risk

Hazard Analysis and Risk Assessment (HARA)

← Back to Glossary
By NHI Mgmt Group Updated November 16, 2026 Domain: Governance, Ownership & Risk

Hazard Analysis and Risk Assessment is a structured method for identifying hazards, estimating the associated risk, and deciding what controls are needed. It is used in safety engineering, especially automotive and industrial systems, to link potential failure modes to severity, exposure, and controllability.

What HARA Is Used For

Hazard Analysis and Risk Assessment is a structured way to identify what can go wrong, estimate how serious that outcome could be, and decide whether the resulting risk needs a control, redesign, or acceptance decision. In practice, it helps teams move from a vague concern about failure to a documented safety judgement about severity, exposure, and controllability.

That makes HARA more than a naming exercise. It is a decision method for turning hazards into ranked safety concerns, so that the most consequential failure modes are addressed first. The value is in making assumptions explicit, especially where people, physical systems, timing, and operating conditions interact.

How HARA Analyses Hazards

HARA usually starts with the system or function, then asks which hazards can arise if a function behaves incorrectly, is unavailable, or behaves too late. The analysis then considers the operating context, because the same failure can be tolerable in one scenario and dangerous in another. That is why HARA is tied to use conditions, not just component faults.

The method typically combines hazard identification with a risk estimate built from factors such as severity, exposure, and controllability. Severity reflects the seriousness of the possible harm, exposure reflects how often the situation can occur, and controllability reflects how well the hazard can be avoided or mitigated once it appears. Together, those factors help determine whether the risk is acceptable, needs reduction, or needs a stronger safety target.

Why HARA Matters In Safety Engineering

HARA is especially important in automotive and industrial systems because these environments often involve automation, human interaction, and time-critical responses. A fault that is merely inconvenient in ordinary IT can become dangerous when it affects braking, steering, motion control, shutdown logic, or operator protection. HARA keeps the analysis focused on real-world consequences rather than abstract defect lists.

The approach also supports traceability. When a hazard leads to a safety requirement, the reasoning from failure mode to control can be reviewed later, challenged, or updated as the design changes. That makes HARA useful both during concept development and during change management when new features, operating modes, or dependencies are introduced.

What HARA Produces And How It Connects To Controls

The output of HARA is usually a set of ranked hazards, associated risk judgements, and the safety goals or controls needed to reduce those risks. The analysis does not stop at identifying danger, it is meant to drive action, whether that means functional safety requirements, design constraints, monitoring, warning mechanisms, or fallback behaviour.

That is why HARA is closely related to broader risk management methods. NHI Management Group’s Risk Management Guide is a useful companion when you need a broader treatment model for risk appetite, risk treatment, and residual risk decisions. For safety-focused systems, the same logic applies: the hazard analysis should end in a defensible control choice, not just a classification.

Risk and Threat Considerations

HARA fails when hazards are identified too narrowly or risk estimates are based on idealised assumptions instead of realistic operating conditions. If exposure is underestimated or controllability is overstated, a dangerous failure mode can be treated as acceptable even though the system is genuinely unsafe in the field.

Failure mechanism: Incomplete hazard coverage, weak scenario modelling, or optimistic judgement can suppress the true severity of a failure path, especially where the system interacts with humans, moving equipment, or fast-changing conditions.

Impact: The result can be missed safety controls, unsafe operating behaviour, or a late design change that is much more expensive to correct than an earlier control decision.

Standards & Framework Alignment

This section maps relevant standards and security frameworks to the operational risks and controls described in this guidance.

CIS Controls v8, NIST CSF 2.0 and NIST SP 800-53 Rev 5 set the technical controls, while ISO/IEC 27001:2022 defines the regulatory obligations.

FrameworkControl / ReferenceRelevance
CIS Controls v8CIS-16 — Application Software SecurityHARA supports safety-oriented control selection for system failure scenarios.
Recommendation — Use application and system security safeguards to reduce unsafe failure modes that HARA identifies.
NIST CSF 2.0GV.RM-01 — Risk Management StrategyHARA is a structured risk method that feeds treatment and acceptance decisions.
Recommendation — Define a risk strategy that turns HARA outputs into consistent treatment decisions.
ISO/IEC 27001:2022A.5.8 — Information security in project managementHARA influences design-time control decisions and traceable risk treatment.
Recommendation — Embed hazard-led risk decisions into project and change governance.
NIST SP 800-53 Rev 5RA-3 — Risk AssessmentHARA is a formalised risk-assessment method for identifying hazards and impacts.
Recommendation — Perform structured risk assessments that translate hazards into documented control needs.

Practitioner Guidance

Why practitioners should care: HARA is only useful when it is tied to the actual operating context, not a generic checklist. The same platform can have very different hazards depending on environment, duty cycle, and who can intervene if something goes wrong.

Practitioner note: Treat controllability as a real human and system response question, not a box to tick. If the hazard depends on quick detection or rapid manual intervention, the analysis should reflect whether that intervention is genuinely plausible under stress, load, and real operating conditions.

Free weekly newsletter

Subscribe to the NHI & AI Identity Journal

The latest on NHI and Agentic AI security – articles, research, breaches, news and events every week.

Bonus 33% off our NHI Course when you subscribe.

NHIMG Editorial Note
Reviewed and updated by the NHIMG editorial team on November 16, 2026.
NHI Mgmt Group — the #1 independent authority on Non-Human Identity, IAM, and Agentic AI security. nhimg.org